How to sew a great twin needle hem!

Oh – It’s so annoying!
Do you know the feeling? You’ve been sewing a super cute jersey dress or perhaps a new fancy top. It’s the perfect fabric. The details are coming out just right and you have finally achieved a great fit. Now you are almost done and just need to hem the finished garment to the just right length.

 

You try several methods, but either the hem rolls up in a very un-charming fashion or there are big bumps in the hem. Or it looks great, but the first time you wear the top, the stitches pop out.. And you are just like AAAAARGH! And consider investing the 600 € in a machine that you know just will do the job right…

 

You do have a couple of options using a standard sewing machine, though:

1. You can hem with an ordinary straight stitch seam. PROS: It’s fast and can look really neat in some fabrics. CONS: You might risk that the hem rolls up in some fabrics. And if you accidentally pull the seam when you put on your new top or dress (which is not hard to do, since you are working in a jersey fabric) you risk that the hem pops and you are left with no hem and loose threads dangling.

2. You can hem using a zigzag stitch. PROS: It’s fast and the hem will be somewhat elastic, meaning you can put on your top without popping the seam, if you just take care not to over stretch the hem when getting dressed. CONS: It doesn’t look very professional and you still risk that the hem will roll up – especially in some kinds of cotton jersey.

3.You can sew a twin needle hem using a special twin needle. PROS: If you get it right it’ll look neat, professional and just like RTW. It’ll be elastic enough that no stitches will ever pop when you put the top on and the stitches give the hem enough weight that it won’t roll. CONS: It can be a very frustrating and time consuming job to get the hem to look just right with out tunnelling – and still have it be elastic.

 

But fear not! Today I’ll show you how to get a great result every time you hem jersey with a twin needle, so that you’ll get a great professionally looking hem that still has lots of elasticity.

 

But first: What is a twin needle?

A twin needle – or a double needle – is a needle that goes into your ordinary sewing machine allowing you to sew with 3 threads at once. Even most old sewing machines, that perhaps can only do a straight stitch, can work with a twin needle. All it takes is an extra thread holder for the machine. My very first machine – I’m guessing it was produced somewhere around 1960 – which I inherited after my son’s great-grandmother could only do a straight stitch. And I’m think this machine is the one that has produced the best looking twin needle stitch of all the machines I’ve tried…

When you sew in stretch and/or jersey fabric, you need to use a stretch twin needle. It has a rounded point (but you can’t see it with the naked eye) that slides through the stitches instead of cutting the thread. Think about a pair of thin nylon tights that has gotten a snag so that the stitches are unravelling – then you can understand why we want to avoid cutting the thread of the stitches in our knit fabric.

 

Get a perfect twin needle hem - MariaDenmark.com

 

Threading the twin needle

When you get to threading your twin needle, there is no way around it: You have to look through the instruction manual that came with your machine. The threading of a twin needle varies a lot from machine to machine – even with in the same brand – and it’s important to get it right to get that nice elastic seam.

To point: When threading my current main machine (a Pfaff Ambition) the two threads that goes into the twin needle have to be threaded the exact same way through tension plates and thread holders until they are separated at the needle. But for another machine I use often, the threads have to go through separate thread holders. So you have to check your manual. If you can’t find it (not even on-line? are you sure?) there is no other way around just experimenting and seeing what you get. But it IS easier to just follow the manual.

By the way – if the twin needle stitching is acting up, then double check the threading. When I was about to take the pictures for this article the stitches didn’t come out right. And when I checked, it turned out that the threads weren’t between the tension plates like they were supposed to. And I have been threading this machine for twin needle sewing many, many times. So it’s an easy mistake!

 

OOH – the tension! (da da da daaaaaa)

Now we get to the fun and experimenting part. We have to find out which tension setting matches the fabric and thread you are working with today.

You’ll need several scraps of the fabric you are working with. And then of course you need to have threaded your machine using the twin needle with two rolls of ordinary polyester thread. Use standard poly thread in your bobbin as well. (I’ve heard that you can get a better result if you use Wooly Nylon in yor bobbin. I haven’t experimented with that, though. Mostly because I haven’t been able to get my hand on it (you can’t get that stuff in Denmark). But when I was in US I picked up some rolls of Wooly Nylon, and I do intend to try it out – and I’ll be sure to share my results!) Set the stitch length to 3 (i.e. a tiny bit longer than you would normally. With some machines it looks better with a stitch length of 3.5. Experiment!)

Begin by setting the thread tension to teh standard value – i.e. the value you usually set it at for your normal sewing or the value the manual recommends for twin needle sewing. On my machine that is 4.

In the example below, I’m using a very nice rayon jersey with the stitch length set to 3. I’ve done four rows of stitching with the thread tension set to (from the left): 6 ,3, 2 and 4.

Get a perfect twin needle hem - MariaDenmark.com

It isn’t very obvious in the picture, but you might still be able to see:

When the thread tension was relatively high (6 and 4) the fabric sort of makes a tunnel between the two threads. But at the same time the seam are super elastic (which you can’t see in the picture, obviously, but you need to test the elasticity of your test sewing by stretching the fabric!)

But then when the thread tension was low (3 and 2) everything looks much better: No tunnelling! But when I tried stretching those stitches, the threads would snap. That won’t do!

So now we are in a dilemma! What do we want? A nice looking twin needle hem or one that’s elastic?

 

Now I’ll show you how you can get both: Elasticity and prettiness, all at once!

The secret is actually interfacing! You want to use a very thin and stretchy interfacing, obviously, one that matches the fabric. I buy the thinnest stretch interfacing i can find and cut it into strips of about 2.5 cm (1″). I press the interfacing to the wrong side of the hem. (I can’t stress this enough: Test on a scrap of fabric before applying to your garment. You want to make absolutely sure that the temperature of the iron works with your fabric and your interfacing! For the rayon jersey I usually use the setting for silk (that’s in the low end of the two dots)).

Get a perfect twin needle hem - MariaDenmark.com

So. Press the interfacing to the wrong side of the hem, and then get to work with your twin needle (again – test on a scrap, before you try this on your hot dress!). In the example below I’ve used a stitch length of 3.5 and set the thread tension to 5 on both samples – one with interfacing on the left and the other one with out interfacing. They are both very elastic, but there is no doubt that the one on the left looks much better – and much more professional!

Get a perfect twin needle hem - MariaDenmark.com

Now you try! I think you’ll really like your twin needle hems now – and you can spend the 650 € on fabric and patterns instead!